Vantageo 11DD-EL
Key Features
Mini 1U Chassis, Opmized for Intel Atom Platorms
2 00W Low Noise Power Supply
1 x 3.5" Internal Drive Bay
OR 2x 2.5" Internal Drive Bay (Optional)
OR 1x Full-height, Half-length PCI Expansion Slot (Optional)
OR 1x 2.5" Internal Drive & 1x FH, HL PCI (optional)
Power Switch, Reset Buon & 5 LED Indicators
1. Intel® Xeon® processor D-1518, Single socket FCBGA 1667; 4-Core, 8 Threads, 35W
2. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
3. 2 PCI-E 3.0 x8, Mini PCI-E (mSATA support), M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280/22110
4. 2 10G SFP+ and 2 GbE LAN
5. 4 SATA3 (6Gbps) ports via SoC
6. 2 USB 3.0 ports (rear), 5 USB 2.0 ports (4 via headers, 1 Type A)
7. 2 SuperDOM, 1 COM, TPM 2.0 header, GPIO and SMbus headers
8. 12V DC Input and ATX Power Source
SPECIFICATIONS
Physical Stats
Form Factor
Mini 1U Chassis
Dimensions
9.0" x 7.25" (22.86cm x 18.42cm)
Processor / Cache
CPU
Intel® Xeon® Processor D-1518
Single Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache
4 cores, 8 threads / 6MB cache
System Memory
Memory Capacity
Up to 128GB Registered ECC RDIMM, DDR4-2133MHz
Or 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type
2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes
4GB, 8GB, 16GB, 32GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors • Detects double-bit errors (using ECC memory)
Expansion Slots
PCI - Express
2 PCI-E 3.0 x8
M.2 PCI-E 3.0x4, M Key 2242/2280/22110, Support SATA devices, Interface: PCI-E 2.0 x1, Mini-PCI-E with mSATA support • Intel® Xeon® Processor D-1518
M.2
1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
On-Board Devices
Chipset
System on Chip
SATA
SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • RSTe
Graphics
Aspeed AST2400 BMC
Network Controllers
Dual LAN with 10G SFP+ from D- 1500 SoC Dual LAN with 1GbE with Intel® I210
IPMI
Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over- LAN support
Input / Output
SATA
4 SATA3 (6Gbps) port Serial
LAN
1 RJ45 Dedicated IPMI LAN port
• 2 1GbE LAN ports
2 10G SFP+ LAN ports
USB
5 USB 2.0 ports (4 headers, 1 Type A)
2 USB 3.0 ports (2 rear)
Serial Port / Header
1 COM Port (1 header)
VGA
1 VGA port
TPM
TPM Header
System BIOS
BIOS Type
128Mb SPI Flash with AMI BIOS
BIOS Features
• PCI 3.0
• USB Keyboard support
RTC (Real Time Clock) Wakeup
•UEFI 2.4
ACPI 5.0
Hardware BIOS Virus protection
SMBIOS 2.8
Operating Environment
Operating Temperature Range
0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range
(-)40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range
10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range
10% ~ 95% (non-condensing)
Management
Software
Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations
ACPI Power Management
(+)12V DC Power Input
CPU thermal trip support for processor protection
ATX Power connector
Control of power-on for recovery from AC power loss
M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL Voltage
PC Health Monitoring
Voltage
(+)1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT
FAN
6x 4-pin fan headers (up to 6 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low
noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed
control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal
control tachometer fan connectors
Temperature
Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED
CPU / System Overheat LED
Other Features
12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Disclaimer : Technical data is subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
Our Contact
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.